加拿大华人论坛 加拿大生活信息虚拟机组网

在加拿大

有没有人搞过？ 虚机建一个2008 r2 做DC。在建一个虚机做路由器和主机通信以便上internet。 应该怎么高呢？？

评论
回复: 虚拟机组网vmware or virtualbox? what's the host OS? why so complex? don't you have a router?

评论
圣经学习中，请多多指教！求购像这样的儿童乐高玩具回复: 虚拟机组网host WIN7 VMwareguest 1 DC(2008 R2)guest 2 ESXi server (guest 2-1 vyatta router)guest 3 XP clientjust want try soft router DC can't communicate with router any idea are wellcome

评论
回复: 虚拟机组网zai qing gao ren

评论
回复: 虚拟机组网没看明白什么意思.

评论
回复: 虚拟机组网GEEKs PLs

评论
回复: 虚拟机组网?

评论
回复: 虚拟机组网我在服务器上弄过。不过不是2008，而是二个老些的server版本。但是我疑惑，你为什么要用虚拟机呢？速度太慢了，虚拟机占用资源很多，严重影响速度，包括主系统的速度都拉下来了。尤其是二个server都有人访问的时候。导致我在用了几个月以后，删除了虚拟机，增加了个服务器。

评论
回复: 虚拟机组网guess you have a vmware workstation/server installed on win 7. if so, try to configure the virtual network of the vmware workstation/server. it should be in a menu. hope that helps. never tried to install esxi as guest.it's better to have a picture to show us the desired architecture...

评论
圣经学习中，请多多指教！求购像这样的儿童乐高玩具host WIN7 VMwareguest 1 DC(2008 R2)guest 2 ESXi server (guest 2-1 vyatta router)guest 3 XP clientjust want try soft router DC can't communicate with router any idea are wellcome点击展开...Don't try to use ESXi as a guest OS to hold other stuff(Just as another guy said here) you can install another soft router under your XP or just enable the route and remote module inside windows 2K8.Not know if you know how to configure IP and network? mostly, you needn't consider much if it's virtual or physical network, it's almost the same for the simple network. in VMware you can see there are two extra virtual network NIC, but forget about it. you can just use the main NIC(VNET0?) for all your stuff. The key is the IP address, Mask and gateway. That's it.And, if you set all three in one network, the router is useless. if you want to use router, then at least you must have two segments of network, where did your DC sit on? another question, if your DC can not reach router, and they are in the same network, try to check if you opened the proper port for route?

评论
Ponder in the Wind（Thanks for correcting me if you think I am wrong)有没有人搞过？ 虚机建一个2008 r2 做DC。在建一个虚机做路由器和主机通信以便上internet。 应该怎么高呢？？点击展开...If you just want all your virtual servers and PCs to go outside, no router needed. just set your virtual network inside virtual OS as NAT or gateway. they are inside the configuration module for virtual machine.

评论
Ponder in the Wind（Thanks for correcting me if you think I am wrong)回复: 虚拟机组网感谢各位的关注。当初是这样想的：虚拟一台单独的服务器做生产环境。（看来这里问题最大，不可能在 vmware下模拟一台隔离的网络）；虚拟一个路由；主机相对于是外网；这样其他的真机可以加入生产域。并透过路由上intnet是不是走错了如果搞两套虚拟机，比如mware+virtualpc有可能吗？

评论
回复: 虚拟机组网感谢各位的关注。当初是这样想的：虚拟一台单独的服务器做生产环境。（看来这里问题最大，不可能在 vmware下模拟一台隔离的网络）；虚拟一个路由；主机相对于是外网；这样其他的真机可以加入生产域。并透过路由上intnet是不是走错了如果搞两套虚拟机，比如mware+virtualpc有可能吗？点击展开...It's possible creating two separate networks in virtual environment.but if you want separate them, you do better use static IP address. let's say:you have a computer(Host) IP as: 192.168.1.15/24 gateway 192.168.1.1 (your router connected to SP, we don't care the public IP outside then)you created a router must have two NICs, one is 192.168.1.105/24 with gateway to 192.168.1.1(remeember it points to the router but not your host, otherwise you need another route software on your Host), another NIC IP as 192.168.2.1/24. now you have two networks. ( As you hosted you router on ESXi, you must make sure your NIC[192.168.1.105] can ping to 192.168.1.1 or 192.168.1.15).set your windows 2K8R2 IP as 192.168.2.100/24, XP as 192.168.2.5/24 and all of their gateway point to 192.168.2.1, then try if you can reach 192.168.2.1.enable your windows 2K8R2 as DC, joint your XP to the DC.If your pc join the DC or not doesn't infect the internet connection but your can control the connectivity for the client PC under DC if the computer joined the DC. that's the domain policy and beyond this discussion.Hope you good luck.

  ·中文新闻 悉尼铁路工会纠纷：避免火车混乱的协议细节浮出水面
·中文新闻 为什么比尔·肖顿体现了澳大利亚政治最好和最坏的一面