加拿大外贸
这个是针对车子的1.The wheels were detached at 69N and the axle present puncture hazard.(requirement:>70N/10S)
2.A principal component of the product,the packaging,a label or a leaflet accompanying the product should be marked with the name and address of the manufacturer or the distributor,or with a trademark and/or mark which clearly identifies the manufacturer/distributor.All these markings should be visible and easily legible by the consumer and should resist normal use conditions.
下面是针对水枪的
1.The diameter of the hole is 8mm and the rigid material is 1.42mm in the thickness.(requirment:if a circular hole in any rigid material less than 1.58mm in the thickness can admit a 6mm diameter rod to a depth of 10mm or greater,it shall also admit a 12mm diameter rod.)
2.A principal component of the product,the packaging,a label or a leaflet accompanying the product should be marked with the name and address of the manufacturer or the distributor,or with a trademark and/or mark which clearly identifies the manufacturer/distributor.All these markings should be visible and easily legible by the consumer and should resist normal use conditions.
评论
这个是针对车子的
1.The wheels were detached at 69N and the axle present puncture hazard.(requirement:>70N/10S)车轱辘在69牛顿的力下掉落，车轴露出形成尖点，要求是大于70
2.A principal component of the product,the packaging,a label or a leaflet accompanying the product should be marked with the name and address of the manufacturer or the distributor,or with a trademark and/or mark which clearly identifies the manufacturer/distributor.All these markings should be visible and easily legible by the consumer and should resist normal use conditions.
产品主体部分，包装，标签或说明书等需标明生产商/销售商的名称和地址，或标明商标，或那些可以清楚辨别以上信息的标识。所有标识清晰可见，并在常规用途中不损毁
评论
1.The diameter of the hole is 8mm and the rigid material is 1.42mm in the thickness.(requirment:if a circular hole in any rigid material less than 1.58mm in the thickness can admit a 6mm diameter rod to a depth of 10mm or greater,it shall also admit a 12mm diameter rod.)
孔洞 直径8mm，材料厚度1.42mm，不符合孔洞要求，或者加厚材料，或者减小孔径或 加大孔径
（这个要求主要考虑的是防止卡死小孩子的手指头）
2.A principal component of the product,the packaging,a label or a leaflet accompanying the product should be marked with the name and address of the manufacturer or the distributor,or with a trademark and/or mark which clearly identifies the manufacturer/distributor.All these markings should be visible and easily legible by the consumer and should resist normal use conditions.
加拿大电商做区块链为什么都注册新加坡基金会 目前做区块链项目的客户都会通过注册基金会来作为项目的主体，为什么都在新加坡注册基金会，首先性价比高，而且新加坡市场也比较成熟，项目 加拿大电商露天电影首发——葡中双语字幕《中央车站》 http://bbs.shanghai.com/thread-1714999-1-1.html screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt='Click here to open new window\nCTRL+Mouse wheel to zoo
·加拿大新闻 加长再进化！全新一代奥迪A6L形象颠覆，更好看还是难看？
·加拿大新闻 丰田推出2026款陆地巡洋舰FJ：复古硬派越野SUV复出
·加拿大新闻 加拿大经济要凉1/3企业为衰退做准备暂停招聘
·加拿大新闻 炸了！列治文13亿加元土地所有权“被判无效”！数百业主慌了
·加拿大新闻 滥发数亿优待盟友？安省劳工厅长坚称没错，还要继续这么做
·汽车 2007款本田CR-V
·汽车 停车场肇事逃逸