加拿大外贸
The finished part from the 2nd cavity would ideally be removed at the same time as the 1st is transferred and placed on a conveyor to the side on mould close. New information from the tool maker in China this afternoon suggests the runner from the 2nd injection sticks in the tool. This will need to be 'picked' from the tool on the removal of the completed part. For accuracy of placement grippers to the side may be best for transfer from the 1st cavity to the 2nd. Any witness will be over-moulded. Removal of the completed part may be better suited to vacuum cups due to the softness of the co-polymer and susceptibility to marking.Expected cycle time is circa. 75 seconds due to wall section thickness on the part. Dwell time between mould open and close can be made to suit transfer operation.
Part weight is circa. 150 grams.
评论
it's too long ...
why do you try by yourself?
评论
i am not sure my words so....
评论
整段翻译求助 请自己先翻译或者注明哪里不懂。
以便问题尽快解决。
评论
双射啤主要是内腔成型后脱出，然后在外腔再啤一次，由于炉内环境变化不是线性的，质量不容易控制
你们是什么问题……
加拿大电商露天电影首发——葡中双语字幕《中央车站》 http://bbs.shanghai.com/thread-1714999-1-1.html screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt='Click here to open new window\nCTRL+Mouse wheel to zoo 加拿大电商做区块链为什么都注册新加坡基金会 目前做区块链项目的客户都会通过注册基金会来作为项目的主体，为什么都在新加坡注册基金会，首先性价比高，而且新加坡市场也比较成熟，项目
·汽车 请推荐一款适合女生开的车（汽油款）
·汽车 我在路边停车时被刮伤了，如何申请保险？