加拿大外贸
6. 液筒传动采用斜齿轮传动，最多10个工位需要一台减速机和电机，电机在10个工位的中间驱动，镀锌液筒转速可调。7. 镀锌冷却系统采用1台冷冻机组对配置槽内的槽液进行冷却，配置槽与3个镀槽间甩水泵进行循环，每个镀槽独立配置过滤机。
8. 融锌槽可以放置两个融锌蓝。融锌槽液通过过滤机可以与配置循环。
9. 配置槽与融锌槽均带有手动槽盖和抽风。
10. 液筒下料后直接输送至甩干机，甩干机顶部设置悬臂的燃烧器进行热风吹干。
评论
1. 生产线详细工艺流程见附件《设备工艺配置表》
2. 液筒载重：
3. 生产线采用三台龙门行车完成工艺输送。
4. 行车，轨道，立柱，几家，槽体加强均采用SUS304 不锈钢制作
5. 抽风系统一套，包括废气处理系统
1. Process details see annex-Annex equipment configuration form
2. Liquid pot load: 85kg (fasten), the running ( outfeed) period is 5 min, that is ,1000kg per hour.
3. 3 LONGMEN vehicles are used for convoying process in production line.
4. Crane, orbit, column, rack, tank, which is adopted SUS 304 to strengthen that.
5. A set of exhaust system, contain emission treatment system.
6. It supports helical gear transmission in liquid pot drive.
评论
6. Hydraulic cylinder drive adopt bevel gear transmission, up to 10 station need a speed reducer and motor, motor drive in the middle of the 10 stations, galvanized hydraulic cylinder speed is adjustable.
7. Galvanized cooling system USES 1 refrigerating units for allocation of groove groove liquid cooling, configuration b广告een slot and three plating tank sling pump cycle, each plating tank independent configuration filter.
8. Melt zinc tank can be placed two zinc. Melting zinc bath can through the filter and configuration loop.
9. Configuration slot and zinc melting tank with manual tank cover and convulsions.
10 fluid tube after blanking delivery directly to the dryer, dryer cantilever the very top of the burner to blow hot air dry.
评论
谁帮我看看呢？谢谢、
加拿大电商刚从事这行半年，对电子行业不了解，自己整理了些，算是学习，供大家分享，也请大家补充。我毕竟是个文科生，对这方面知识严重欠缺。 DVD:英文全名是Digital Video Disk, 即数字视频光 加拿大电商昨天我把提单复件发给了客户，今天收到了他回信，如下： Dear Nicholas, please send all shipping documents. We will check B/L copy and we will reply ASAP. Thank you Best Regards .........................................
·生活百科 Fronius Primo gen24 8.0随机掉落功率gen
·生活百科 RCA的适配器到闪电？