加拿大外贸
DECLARATION OF COMPLIANCEThe written declaration referred to in Article 9 shall contain the
following information:
(1) the identity and address of the business operator which
manufactures or imports the plastic materials or articles or the
substances intended for the manufacturing of those materials and
articles;
(2) the identity of the materials, the articles or the substances
intended for the manufacturing of those materials and articles;
(3) the date of the declaration;
(4) confirmation that the plastic materials or articles meet relevant
requirements laid down in this Directive and Regulation (EC) No
1935/2004;
(5) adequate information relative to the substances used for which
restrictions and/or specifications are in place under this Directive
to allow the downstream business operators to ensure compliance with
those restrictions;
(6) adequate information relative to the substances which are subject
to a restriction in food, obtained by experimental data or theoretical
calculation about the level of their specific migration and, where
appropriate, purity criteria in accordance with Directives 95/31/EC,
95/45/EC and 96/77/EC to enable the user of these materials or
articles to comply with the relevant Community provisions or, in their
absence, with national provisions applicable to food;
(7) specifications on the use of the material or article, such as: (i)
type or types of food with which it is intended to be put in contact;
(ii) time and temperature of treatment and storage in contact with the
food; (iii) ratio of food contact surface area to volume used to
establish the compliance of the material or article;
(8) when a plastic functional barrier is used in a plastic multi-layer
material or article, the confirmation that the material or article
complies with the requirements of Article 7a(2), (3) and 4 of this
Directive.
The written declaration shall permit an easy identification of the
materials, articles or substances for which it is issued and shall be
renewed when substantial changes in the production bring about changes
in the migration or when new scientific data are available.'
评论
按照你的客户的要求，一般是办理CO 或FORM A .找代理帮办理提供装箱单和发票
[ 本帖最后由 hualuohuaxiang 于 2010-6-8 17:15 编辑 ]
评论
楼主 去芬兰属于欧盟国家，去欧盟一般办理FORM A的，具体最好跟客户确认一下
评论
办理FA客人在清关的时候可以享受到关税优惠，先和客人确认好，根据客人的需求去办理。
评论
是的，最好是跟客户确认，这里我们说的可能有误差呢
评论
按客户要求做，一般是FA
评论
按客户要求来办理，到这个国家国外客户一般都要求办理FA，
客户清关可以优税
评论
普惠制原产地证明书（FORM A）
普惠制原产地证书是具有法律效力的我国出口产品在给惠国享受在最惠国税率基础上进一步减免进口关税的官方凭证。
目前给予我国普惠制待遇的国家共38个：欧盟27国（比利时、丹麦、英国、德国、法国、爱尔兰、意大利、卢森堡、荷兰、希腊、葡萄牙、西班牙、奥地利、芬兰、瑞典、波兰、捷克、斯洛伐克、拉脱维亚、爱沙尼亚、立陶宛、匈牙利、马耳他、塞浦路斯、斯洛文尼亚、保加利亚、罗马尼亚）、挪威、瑞士、土耳其、俄罗斯、白俄罗斯、乌克兰、哈萨克斯坦、日本、加拿大、澳大利亚和新西兰。
评论
优税FA，LZ:) :)
评论
楼主 去芬兰属于欧盟国家，去欧盟一般办理FORM A的，具体最好跟客户确认一下，如果是木制品要做熏蒸证明！
评论
芬兰一般要办理FORM A来减免关税的！
评论
办FA，减关税，有需要欢迎咨询
评论
芬兰一般要办理FORM A来减免关税的
可以找代理代办的``
提供装箱单和发票就可以了
评论
FORM A........
评论
一般是FA 最好还是再跟客户确认一下
大部分都可以找代理办理的 QQ:1371279835
加拿大电商我的客户需要从非洲免关税国家进口一些商品，所谓的免关税是不是也不用交增值税。 如果要交增值税，增值税的税率是多少？ 菜鸟向各位前辈请教了。 评论 关税与增值税是俩个税种 加拿大电商Hallo, bitte schicken Sie uns mehr info uber die QT8-15- Machine MfG Alfredo 评论 晕死 是德语 你去德语区问问吧 评论 要你关于QT8-15- 这个型号机器的信息 评论 跟你要关于QT8-15- 这个型号机器的资料信息
·新西兰新闻 警方用DNA调查北岛乡村尸骸 当地56年前有儿童离奇失踪
·新西兰新闻 北岛消防员处置车祸现场 发现死者为自己的妻子